1.5V SMD Magnetic Buzzer 119-904515-02 manufacturer from China CHANGZHOU FHD ELECTRONICS COMPANY

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: 119-904515-02

1.5V SMD Magnetic Buzzer
Quick Detail:<

1.5V SMD Magnetic Buzzer

Quick Detail:

Size: D9.0mm*H4.5mm
SPL: Min.85dB at 10cm Input 2730Hz/1.5Vo-p 1/2 Duty Square Wave
Coil Resistance: 5.5+/-1 ohm
Operating Voltage: 1-2.5Vo-p
Rated Current: Max.90mA Input 2730Hz/1.5Vo-p 1/2 Duty Square Wave

Description:

buzzer
SMD Electro-Magnetic Buzzer
SMD Electro-Magnetic Element
1.5V Buzzer
small Buzzer

Specification:

1. Technical Parameter

Measuring condition

Part shall be measured under a condition (Temperature: 535, Humidity: 45%85%R.H., Atmospheric pressure: 860 1060hPa) unless the standard condition (Temperature: 25±3, Humidity: 60±10%R.H. Atmospheric pressure: 860 1060hPa) is regulated to measure.

1	Rated Voltage	1.5 Vo-p
2	Operating Voltage	12.5 Vo-p
3	Rated Current	Max.90mA ,at 2730Hz 50% duty Square Wave 1.5Vo-p
4	Sound Output at 10cm	Min. 85dB,at 2730Hz 50% duty Square Wave 1.5Vo-p
5	Coil Resistance	5.5±1Ω
6	Resonant Frequency	2730Hz
7	Operating Temperature	-20+70
8	Store Temperature	-30+80
9	Net Weight	Approx 1g
10	RoHS	Yes

2. Dimensions Unit: mm

*Unit: mm; Tolerance: ±0.5mm Except Specified

*Housing Material: Black PPS

*Terminal plate: 2 soldering pads, Gold Plating Brass

3.Electrical And Acoustical Measuring Condition

Recommended Driving Circuit

Resonant frequency, 1/2 duty cycle. Square wave.

Signal amplitude should be large enough tosaturate

the transistor.

Recommended Setting

4.Frequency Response

1.5Vo-p 50% duty Square wave,10cm

Application:

CHANGZHOU FHD ELECTRONICS CO., LTD is a professional manufacturer in the field of ceramic components ,our products is widely used in household electrical appliances; mobile phones; computers; medical equipment; alarm system; pos machine access control system; toy; automobile; instrument and meter; electrical equipment; we can produce all kinds of piezo buzzers as long as you have the following details; welcome to consultation discussion.

Surface mounting condition

(1)Reflow soldering

Note:

In automated mounting of the SMD sound transducers on PCB, any bending, expanding and pulling forces or shocks against the SMD sound transducers shall be kept minimum to prevent them from electrical failures and mechanical damages of the devices.
In the reflow soldering, too high soldering temperatures and too large temperatur Gradient such as rapid heating or cooling may cause electrical failures and mechanical damages of the devices

(2)Soldering pattern